Newport Coast Estate Garages
Metallic Epoxy Garage Floors in Newport Coast
A one of one metallic pour turns a Newport Coast garage into the room your collection deserves. Metallic systems run $10 to $16 per square foot, diamond ground and finished with a UV stable topcoat rated for hot tires. Insured crews, a workmanship warranty in writing, and a free on site estimate before any work begins.
The Flagship Finish
One pour. One floor. One of one.
The garages behind the gates of Crystal Cove and Pelican Crest are not storage. They are showrooms, finished to the same standard as the rest of the house and built to hold collections across 3 and 4 plus bays. A metallic epoxy pour is the floor equivalent of a statement piece: deep gloss, movement in the surface, a design chosen with you, and no two pours alike. From Pelican Hill to Newport Ridge and Ocean Heights, this is the finish owners ask for when the garage is part of the tour.
Pelora Surfaces builds these floors the way an estate deserves. Diamond ground prep, never acid etch shortcuts. Moisture testing before a drop of resin goes down, with crack and pit repair included. The epoxy build coat is finished with a UV stable topcoat rated for hot tire pickup, so the floor does not peel or yellow. Insured crews, a workmanship warranty in writing, and a finish you design with us at the free on site estimate.
- The statement finish for Newport Coast estate garages
- Sized for Crystal Cove and Pelican Crest collections, 3 and 4 plus bays
- One of one metallic pours, designed with you, no two alike
- Diamond ground prep and moisture testing, never acid etch shortcuts
- UV stable topcoat rated for hot tire pickup, no peel, no yellowing
- Insured crews and a workmanship warranty in writing
The Proof
Same garage, new floor
Drag the handle. Bare concrete on one side, a finished Pelora Surfaces floor on the other.
Before
After
Newport Coast garages rarely stop at two bays, so we quote 3 and 4 plus bay layouts by exact square footage, with crack and pit repair included before coating. The free on site estimate takes about 20 minutes and you get an exact written quote before any work begins.
Every product we use has pet safe and kid safe options, landscaping is pre soaked and protected, and treated areas are rinsed thoroughly before we leave.
Beyond Metallic Epoxy Garage Floors
Every Pelora Surfaces service, in Newport Coast
Pressure Washing
Driveways, patios, and walkways across Newport Coast stripped of grime and brought back to bright.
House Soft Washing
The whole exterior washed gently at low pressure, algae killed at the root, windows rinsed spot free.
Concrete Cleaning
Oil, rust, and oxidation lifted with targeted chemistry, plus optional sealing and concrete painting.
Gutter Cleaning
Cleared by hand, flushed, flow tested, and documented with photos.
Epoxy Floors
Flake and metallic garage floors over diamond ground prep, warrantied in writing.
Full Exterior Refresh
House, concrete, and gutters in one visit: one crew, one schedule, one warranty.
Questions
Metallic Epoxy Garage Floors in Newport Coast: FAQ
How much does it cost to epoxy a garage floor in Newport Coast?
Metallic epoxy runs $10 to $16 per square foot, and a standard two car garage of about 450 sq ft lands between $4,000 and $7,000. Flake systems run $7 to $10 per square foot if you want a durable finish without the pour. For the 3 and 4 plus bay garages common in Newport Coast, we measure and quote exact square footage at the free on site estimate.
How long before I can park on a new epoxy floor?
With a polyaspartic grade topcoat, most floors can take vehicle traffic in 24 to 48 hours. Light foot traffic is fine in 12 to 24 hours, and full chemical cure comes at 3 to 5 days, which is when we recommend moving contents back into the garage.
Will a metallic epoxy floor yellow in the sunlight?
No. Epoxy alone can amber in direct light, so we pair the epoxy build coat with a high performance UV stable topcoat that stays clear and is rated for hot tire pickup. That protection is built into our metallic pricing of $10 to $16 per square foot, not an upcharge.
Can you do a metallic floor across a 4 car garage in Newport Coast?
Yes. Multi car garages are where metallic shows best, and Newport Coast estates with 3 and 4 plus bays are exactly what we build for: a larger floor gives the pour more room for depth and movement, at $10 to $16 per square foot. Every floor gets diamond ground prep, moisture testing, and crack and pit repair before coating.
Do you serve Crystal Cove and Pelican Hill in Newport Coast?
Yes. We serve all of Newport Coast, including Crystal Cove, Pelican Hill, and Newport Ridge, from our base in Newport Beach. The free on site estimate takes about 20 minutes and comes with an exact written quote before any work begins.
What is the difference between metallic and flake epoxy?
Flake is a durable, textured finish at $7 to $10 per square foot, while metallic is a hand poured, one of one gloss finish at $10 to $16 per square foot. On a standard two car garage of about 450 sq ft, that is $2,800 to $4,500 for flake versus $4,000 to $7,000 for metallic. Flake hides more, metallic makes the statement, and both get the same diamond ground prep and UV stable topcoat.
Free Estimate
Ready to transform your Newport Coast home?
Free on site estimate, about 20 minutes, exact written quote before any work begins.